Fit testing confirms that a respirator seals properly to the wearer’s face. This guide covers QNFT vs QLFT methods, when each is required, and how to run a compliant fit testing programme.
Respirator Fit Testing: Quantitative and Qualitative Methods for Australian Workplaces Read More »
Choosing the right respirator for dust exposure in Australian workplaces — P1, P2 and P3 classes, half-face vs full-face, fit testing requirements and RPE programme management.
Respiratory Protection for Dust: Selecting and Using the Right Respirator in Australia Read More »
Selecting the wrong gas cartridge for a chemical respirator can be as dangerous as wearing no respirator at all. This guide covers Australian/New Zealand Standards for respiratory protection, cartridge types, breakthrough time, and end-of-service-life indicators.
Gas Cartridge Selection for Chemical Vapour Respirators: An Australian Guide Read More »
Published: March 2026 | By Anitech Occupational Hygiene Team Part of our Mask Fit Testing Australia: Complete Guide → Anitech provides RESP-FIT accredited respirator fit testing across Adelaide and South Australia — delivering quantitative PortaCount testing, comprehensive health monitoring records, and full WHS compliance support to construction, manufacturing, healthcare and mining workplaces. Whether you operate
Mask Fit Testing Adelaide — South Australia Onsite and Clinic Services (2026) Read More »
Published: March 2026 | By Anitech Occupational Hygiene Team Part of our Mask Fit Testing Australia: Complete Guide → The 69% initial fit test failure rate found in a Victorian healthcare worker study reflects a wider truth about respiratory protection: most P2 and N95 respirators have historically been designed and tested using male face anthropometric
Published: March 2026 | By Anitech Occupational Hygiene Team Part of our Mask Fit Testing Australia: Complete Guide → The TSI PortaCount Pro+ is the global standard instrument for quantitative respirator fit testing — and it is the method used by Anitech’s fit testing team across Australia. If you work in construction, mining, healthcare, manufacturing
Published: March 2026 | By Anitech Occupational Hygiene Team Part of our Mask Fit Testing Australia: Complete Guide → Respirator fit testing records are not just administrative paperwork tucked away in a filing cabinet. Under Australian WHS Regulations, they are classified as health monitoring records — a legal designation that triggers specific retention obligations, privacy
Published: March 2026 | By Anitech Occupational Hygiene Team Part of our Mask Fit Testing Australia: Complete Guide Walk into any hardware store, pharmacy, or safety equipment supplier in Australia and you’ll see P2, N95, FFP2, and P3 respirators on the shelf. If you’re a safety manager, occupational hygienist, or worker responsible for specifying respiratory
Published: March 2026 | By Anitech Occupational Hygiene Team Part of our Mask Fit Testing Australia: Complete Guide We’ve been fitting respiratory protection in Australia for two decades, and we hear the same questions from workers, safety managers, and employers over and over. Some are about the testing process itself — what happens, does it
Mask Fit Testing FAQ: 20 Questions Answered by Australian Occupational Hygienists (2026) Read More »
Published: March 2026 | By Anitech Occupational Hygiene Team Part of our Mask Fit Testing Australia: Complete Guide Organisations that use respiratory protective equipment (RPE) in Australia often ask us the same question: “Do we need to fit test every year, or can we test less frequently to save money?” The honest answer is more